Stainless steel inline centrifugal pump working conditions
1. Suction pressure ≤1.0mpa, or the highest working pressure of pump system ≤1.6mpa, ie pump suction pressure + pump head ≤1.6mpa, pump static pressure test pressure is 2.5mpa, please indicate system working pressure when ordering. When the working pressure of the pump system is greater than 1.6mpa, it should be separately submitted at the time of ordering. In order to manufacture, the overcurrent portion and the coupling portion of the pump are made of cast steel.
2. Ambient temperature <40 ° C, relative humidity <95%.
3. The volume of solid particles in the medium to be transported does not exceed 0.1% of the unit volume, and the particle size is <0.2 mm.
Note: If the medium with small particles, please specify when ordering, so that the manufacturer can adopt a wear-resistant mechanical seal.
1. Suction pressure ≤1.0mpa, or the highest working pressure of pump system ≤1.6mpa, ie pump suction pressure + pump head ≤1.6mpa, pump static pressure test pressure is 2.5mpa, please indicate system working pressure when ordering. When the working pressure of the pump system is greater than 1.6mpa, it should be separately submitted at the time of ordering. In order to manufacture, the overcurrent portion and the coupling portion of the pump are made of cast steel.
2. Ambient temperature <40 ° C, relative humidity <95%.
3. The volume of solid particles in the medium to be transported does not exceed 0.1% of the unit volume, and the particle size is <0.2 mm.
Note: If the medium with small particles, please specify when ordering, so that the manufacturer can adopt a wear-resistant mechanical seal.
